1.0

Function Window 29
Sampler
You can add sound effects and additional loops to your DJ performance using
the sampler. Load samples into one of the 8 integrated sampler slots and play
them back as beat-synchronized loops or individual samples.
Hint: You can load included samples into the MAGIX
Digital DJ sampler. In order to be able to edit relooper
patterns, you must upgrade (view page 9) your version
to Deckadance Home or Club Edition.
Controls
• LOAD WAV - Loads wave files from disk.
• SAVE WAV - Saves the current sample to disk as a WAV file. Not in MAGIX
Digital DJ, requires upgrade (view page 9).
• < > Arrows right/left – next/previous sample in catalog
• Arrows up/down – sample pitch higher/lower
• Volume (Vertical Fader) - Controls the output level of the sampler slot.
• Play button - Left-click for momentary playback, right-click for continuous
playback.
• REC. LOOP - Records the current output from the associated deck. The
length of the recorded loop is set by the Loop/Leap (view page 16) length
switches on the deck being recorded. Not in MAGIX Digital DJ, requires
upgrade (view page 9).
• BEAT SYNC - Select to play samples on-cue and in time with the current
track (if a beat is detected). The beat phase and playback speed of the
assigned deck (A/B, see below) will be used.
NOTE: The Pitch Up/Down buttons (to the right of the Rec Loop &amp Beat
Sync buttons) won't function if this function is selected.
• A / B - Assigns the sampler to deck A or B.
• (Headphones) - Sends the output to the headphone mix bus.
• Effects (Horizontal Fader) - Left: Low Pass filter. Right: High Pass filter.