1.0

Track Window and Transport Controls 17
loops/leaps are synced to the nearest beat/bar. The loop may be shortened
or made longer using the arrows.
• Pitch Slider - Move the slider to change the speed of the song (down is faster
and up slower). The range can be adjusted on the General Settings page
between +/- 6% and +/-50%.
NOTE: Hold down the [CTRL] key while moving the pitch fader to get a finer
resolution of 0.01%.
• TRACK - Opens a sub-window containing a number of tools for resolving
beat-sync & analysis issues:
• TAP - Tap the button in
time with the song to set
the tempo.
• 1/2 & 2/1 - Halves or
Doubles the detected
tempo (as selected).
• <<| & |>> – Nudge the
beat-markers forward or
backward as selected.
• A.BEATGRID - Auto beatgrid. The Beatgrid is used to sync all tempo
sensitive functions (sampler loops, beat-mixing etc) to the song's
tempo:
- Auto ON (button white) - MAGIX Digital DJ will set the Beat
marks automatically.
- Auto OFF (button grey) - Manual beat-grid settings is possible.
Hold Shift+Click anywhere on the waveform and drag OR click
on the nudge buttons below the A.BEATGRID button.
• Rescan - Forces a rescan of the beat and frequency analysis.
• Ready - Shows the progress of the analysis.
• OK - Accept settings and return to the standard interface controls.
• SLAVE - Slaves the tempo to the Master tempo (see the toolbar).
Note: The Pitch slider will be de-activated in slave mode.
• SYNC - Syncs the beat to the other Deck. Left-click is momentary, right-click
is a locking switch.
• Beat jump arrows - Upper arrows jumps one beat, lower jumps one bar,
forward/backward.