2013

Mastering 81
Graphic Equalizer
The 10-track equalizer divides the frequency spectrum into 10 areas (tracks) and
supplies them with separated volume controls, which allows you to achieve many
impressive effects, from the simple rising of the bass, to total sound transformation. If
you raise the low frequencies too much throughout the whole level, it can cause
distortions. In this case, lower the master volume using the master volume control on
the main screen.
Thumb Controls: All of the 10 frequency areas can be raised or decreased separately
by the 10 volume controls.
Link Bands: Using this switch you can match the frequency areas in a flexible way to
avoid the overemphasizing of single frequency areas that sound artificial.
A/B: If you have selected a preset for the effect and later you change it manually, you
can compare the original-preset-sound with the new adjustments using the A/B-
switch.
Reset: Reset inserts the sound effect into the neutral starting position where no
processing power is used and where no effect is calculated in the sound.
Touch-screen (right EQ-Section): This is the "sensor-field" of the EQ: Use your
mouse to draw a curve that will be transferred immediately into the corresponding EQ
control adjustment.
Brilliance Enhancer
The Brilliance Enhancer is a high-end audio tool with which, for example, losses in
high frequencies, which occur with MP3 compression or while recording older
records, can be regained.
In contrast to the equalizer, which only works on the currently available frequency, the
brilliance enhancer calculates new harmonics and noticeably revitalizes the sound
from residual material