18.0

Cleaning 85
www.magix.com
Tempo/Resampling
This effect is only available as an object effect (view page 72).
The fader lets you change the playback speed of objects so that they are
better aligned. The effect can be applied in two ways, either as resampling or
as timestretching. You can change the mode in the preset list at the very
bottom.
 Resampling mode can be used to change speed and pitch just like on a
cassette. Use this mode to adjust LP recordings made at the incorrect speed.
 Timestretching mode applies a high-quality timestretching algorithm
(universal HQ) to keep the pitch constant in spite of speed changes. Use this
mode to adjust the tempo of different tracks to match each other without
influencing the pitch, e.g. for a DJ mix.
The effect is also available as a mouse mode (view page 39) for changing the
tempo across a
larger range of values.
Resampling for incorrect record speeds
If you want to record a record that was recorded at 78 rpm, then you normally
have a problem: These older shellac LPs aren't able to be played back by
most turntables. With the help of this resampling technology, it's possible to
playback the record at the incorrect speed, record it, and then correct the
speed with a single click.
Different presets have been provided for this. The first number indicates the
speed at which the record was played back, and the second shows the speed
that it should be played at. For example, if an older 78 rpm shellac record was
played at 33 rpms, then you would use the "33/78" preset.
A second group of presets are for adjusting wave files with different sampling
rates to the project. These are selected automatically when this sort of wave
file is loaded into the project. The first number here is also the sample rate of
the project (for playback, normally 44.1 kHz or CDs), and the second is the
wave file (the target playback rate).