17.0

Mastering 99
www.magix.com
enlargement of the filter curve.
Value range: Here you can set the displayed value range in dB.
Curve display: Here you can switch between a bar and a curved display.
MultiMax
MultiMax is a compressor with three independent frequency bands. The
dynamics are edited separately for each band.
The advantage of a multi-band compressor in comparison to a "normal"
compressor is that the "pumping" tendency and other disturbing side effects
are dramatically reduced while editing dynamics. For instance, it can prevent a
bass top peak from "dragging down" the entire signal.
Multi-band technology also lets you specifically edit individual frequency
ranges.
Link bands: When this button is activated and one fader is adjusted all faders
are changed in the same ratio. The type of dynamic editing is not influenced.
Limiter: MultiMax includes a limiter that prevents clipping by automatically
lowering the level. Quiet parts remain unaffected.
High quality: When the "High quality" setting is activated, an even more
precise algorithm is used, but it also requires more processing power. We
recommend that you switch on this setting before you export the project.
Setting the frequency bands: The settings of the frequency bands are
changed directly in the graphic. Simply click on the separator lines and move
them.
Bass/Mid/High: These knobs control the level of compression for each
frequency band.
Presets: In MultiMax you can use the presets to open two more special
functions.