Operation Manual

7
5. Installation
5.1. Installation of camera
The camera can be installed inside as well as on the outside of the vehicle as it is
water-proof. Inside the vehicle, the camera can be installed using the provided adhesive
pad.Thecameracanalsobeattachedinsideoroutsidethevehicleusingthexedholder.
Fix the camera at a point not impeding your rear view. It must also be ensured that the
cable is safely routed.
Forxingthecamerausingbolts,suitableholesmustrstbedrilledattheplaceofinstalla-
tion. Next, bolt the holder to the supporting surface, using the supplied bolts. Then lay the
cableinitsnalposition.
Whensecuringthecamerausingtheadhesivepad,rstlaythecableinitsnalposition.
Cleansurfacewithsomealcoholtoremovedustandgrease.Removeprotectivelmfrom
adhesivepadandrmlypresspadontosurface.
Turn inside the holder to correctly align camera as required.