Operation Manual

14 15Quick start instructions for MAC OSQuick start instructions for MAC OS
IRLUK IRL UK
Quick start instructions
for MAC OS
1. Hardware installation
• Connect IP security camera to
router. Either using supplied
network cable or via WLAN. To
connect the IP security camera
2. Determine IP address of your router
• First you require the local IP address of your router. In
order to determine the IP address of the router on your
Mac computer, click on menu bar . Select “System set-
tings” and then “Network”.
• The below window appears.
• Select the current network connection from the
window. This is indicated by the preceding green point
( in this case “WLAN”).
• Next open “Further Options”.
Change to page “TCP/IP“.
The local IP address of your router is listed behind “Rou-
ter“. The address in the below example is 192.168.16.1.
QUICK
START
INSTRUC
-
TIONS!
using WLAN read instructions on page 26.
• Connect IP security camera with supplied LAN cable
and plug it into the left LAN socket of the PoE adapter.