Operation Manual

76 77
IRLUK
SettingsSettings
IRL UK
FTP settings
The IP security camera offers the option to upload images to
an FTP server once or regularly. Specify the required additio-
nal data for an FTP server to be used.
1. Select option “FTP settings” from the bottom of the menu
and select “Use FTP”.
2. Activate “Use FTP “, if images of the IP security camera are
to be uploaded to an FTP server.
• Server: Enter address of FTP server.
• Port: Enter the port used for FTP-Server access. The stan-
dard value is 21.
• User name: Enter the name of a user account entitled to
write to the FTP Server.
• Password: Enter password for User account.
• Path: Enter the path under which images are to be stored
on the FTP server.
• Transfer mode: Select whether a passive or active FTP
connection is to be requested for the transfer.
• Upload in interval: Select this option if you wish images of
the IP security camera to be uploaded to the FTP server at
regular intervals.
• Interval (seconds): Specify at what intervals an image is
to be taken and transferred. Values are in seconds.
• Enter file name: Select this option if you wish to specify
a file name. If this option has not been selected, a prede-
fined file name will be used when saving the images.
• File name: Enter your own file name. A sequential number is
assigned to the specified name during saving of the images.
• Use time schedule: You can restrict the period of time during
which images can be loaded onto the FTP server. As soon as this
option is selected, the adjacent time schedule appears, in which
the active times can be selected. Select the times during which
the alarm settings should be active.