Operation Manual

64 65
IRLUK
SettingsSettings
IRL UK
The following authorizations are available for a user account:
1. Visitor: Visitors can only call up the camera image but can
not change any settings.
2. Operator: As Operator you can set up the camera image
(e.g. brightness and contrast) but cannot change any
settings.
3. Administrator: The user can change all settings.
Click on “Save“, to accept the changed settings. You have to
restart the IP security camera before the changes are saved
in the user accounts.
Network settings
In order to connect the IP security camera to an existing net-
work or a router, network settings must be entered.
1. Use DHCP: If your network allows automatic addition of a
new device (Client). select this option. All required data are
obtained directly from the server or router.
2. Port of Web user interface: Connections in a network are
made via Ports. Server and any connected device (Client)
can operate via a different ports if the network address is
identical.
A standard value of 80 is specified for the IP security camera.
Where necessary this can be changed in the area 1-65535.