Operation Manual

52 53
IRLUK
StartStart
IRL UK
Determine IP address of IP security camera
Open Internet Browser “Safari“ and enter the previously de-
termined IP address of the router. The configuration page of
the router opens. Generally an option “DHCP table“ or “DHCP
reservation“, can be found under Settings, which can be cal-
led up. You then receive a list of all devices in the network as
shown in the below example.
Please note that the illustration of the configuration of your
router can differ from the one in the example.
In this list, the IP security camera can be found under the
name “ipcam_xxx“ . In the above example this would be
“ipcam_006E060241B6“. Next to it is the local IP address of
the IP security camera (here: 192.168.1.113). Enter it in a new
window of the Browser (Safari) in order to open the configu-
ration page of the IP security camera.
Now continue the installation as specified in section Manual
set-up of IP security camera.
Installation tips
Below, we have provided different information relating to the
installation of the IP security camera in case of problems with
the standard installation. For further information see page
http://www.ipc-info.com.
The program supra IPCam Config can not find the
camera.
Are IP security camera and computer connected to router?
1. If various wireless networks are active on the computer,
deactivate the wireless networks to which the IP security
camera is not connected.
2. Deactivate the Firewall of the computer.
The router has no port for the network cable.
1. Connect the IP security camera directly to the computer.
2. Deactivate all networks on the computer.