Operation Manual

28 29
IRLUK
StartStart
IRL UK
Installing the IP security camera
Hardware installation
In order to carry out the first settings in the IP security ca-
mera, the network cable must be connected to the router.
A wireless connection via WLAN is only available once this
has been set up in the IP security camera using the cable
connection.
Plug a LAN cable into the right socket (LAN) of the PoE adapter
and connect it to the router.
The network connection of the IP security camera contains
two control LEDs.
• Yellow indicates that network activity is taking place.
• Green: Indicates that the IP security camera is connected to
a network.
NOTE!
If your router does not contain a port for connec-
ting the network cable, the IP security camera can
also be set up without a router.
NOTE!
For this purpose deactivate all networks existing
on your computer and plug the network cable of
the IP security camera directly into the computer.
You can also access the IP security camera via the
program supra IPCam Config (see section Soft-
ware installation).
System requirements
Operating system: The software provided on the enclosed
CD is only suitable for Windows operating systems. Using
the Browser access, the IP security camera can also be set up
using Mac OS, Linux or other operating systems.
• Operating systems: Windows XP (SP 2), Vista, 7, 8
• Processor: 2.0 GHz or higher
• RAM memory: 512 MByte or higher
• Network card: 10MBit/s or higher
• RAM memory: 512 MByte or higher
• Internet-Browser: Internet Explorer (from version 7),
Firefox (from version 3),Google
Chrome, Safari, Opera (latest
version)
• Screen resolution: 1024 x 768 or higher
Fig.: 3 Fig.: 4