Preface UK IRL 7 Preface Dear customer, Congratulations on purchasing a high quality MAGINON product. You have chosen a modern IP security camera with excellent technical equipment and respective accessory, which is particularly easy to operate. The device comes with a 3 year warranty. In case of a defect in the IP security camera, you require the enclosed warranty card and proof of purchase. Keep these in a safe place. Imprint Issued by: supra Foto-Elektronik-Vertriebs-GmbH Denisstr.
8 UK IRL General General Read and keep instructions These Operating Instructions belong to this IP security camera. It contains important information about the start-up and handling. For ease of understanding, the “IP security camera” is just referred to as IP security camera in these Operating Instructions Study these Operating Instructions and, in particular the Safety information in detail prior to using the IP security camera.
10 UK IRL QUICK STARTINSTRUCTIONS! Quick start instructions for Windows Quick start instructions for Windows 1. Hardware installation Quick start instructions for Windows UK IRL 11 2. Software installation • Install “Supra IPCam“ software on your computer using the supplied CD. • Connect IP security camera to router. Either using supplied network cable or via WLAN. To connect the IP security camera using WLAN read instructions on page 26. 3.
12 UK IRL Quick start instructions for Windows Quick start instructions for Windows UK IRL 5. Activate IP security camera 7. Setting up IP security camera in app • Enter www.supra-space.de in your Browser and log in. • Use symbol to log onto supra space. Use the log-on information used in the Setup Assistant. • After logging on, the camera is immediately available from a list under the chosen camera name. Select it from the display in order to view the camera image. 6.
14 UK IRL QUICK START INSTRUCTIONS! UK Quick start instructions for MAC OS Quick start instructions for MAC OS Quick start instructions for MAC OS 2. Determine IP address of your router 1. Hardware installation • Connect IP security camera to router. Either using supplied network cable or via WLAN. To connect the IP security camera using WLAN read instructions on page 26. IRL 15 • First you require the local IP address of your router.
16 UK IRL Quick start instructions for MAC OS Note down this local IP address. 3. Determine IP address of IP security camera • Open Internet Browser “Safari“ and enter the previously determined IP address of the router. • The configuration page of the router opens. Quick start instructions for MAC OS UK IRL 17 • Log on to the router. The log-on information can be found in the Operating Instructions of your router.
18 UK IRL Quick start instructions for MAC OS Quick start instructions for MAC OS UK IRL 5. Activate IP security camera 7. Setting up IP security camera in app • Enter www.supra-space.de in your Browser and log in. • Use symbol to log onto supra space. Use the log-on information used in the Setup Assistant. • After logging on, the camera is immediately available from a list under the chosen camera name. Select it from the display in order to view the camera image. 6.
20 UK IRL Safety Safety Correct use The IP security camera is solely designed to be used as a IP security camera . It is only suitable for private and not or commercial use. Only use IP security camera as described in the operating instructions. Any other use is deemed to be incorrect and can cause material damage and loss of data. The manufacturers or dealers do not accept any liability for damage resulting from improper or incorrect use.
22 UK IRL Safety −− Ensure that children do not push objects into the IP security camera. −− When not using or cleaning the IP security camera or in case of a fault, always switch off the IP security camera and pull mains connecter out of socket. WARNING! Hazard or children and persons with reduced physical, sensory or mental abilities (such as partially disabled, older persons with limited physical and mental abilities) or lack of experience and know-how (such as older children).
24 UK IRL Safety −− Never place IP security camera in dishwasher. This would destroy the camera. −− Do not use IP security camera if plastic or metal parts of the camera show cracks or tears or are deformed. Replace damaged parts only with original spare parts. −− Damage to the electronics, lens or accessory caused by external influences such as impacts, falls or others are not covered by the warranty and are chargeable.
26 UK IRL Start Assembling the IP security camera Using the supplied wall fixing, install IP security camera at a fixed location. Note! Danger of material damage! Incorrect use of the IP security camera during assembly can cause the IP security camera to be damaged. −− Do not place IP security camera directly next to electronic devices as this could produce interference. In case of picture interference, test IP security camera at another location.
28 UK IRL Start Installing the IP security camera Hardware installation In order to carry out the first settings in the IP security camera, the network cable must be connected to the router. A wireless connection via WLAN is only available once this has been set up in the IP security camera using the cable connection. Plug a LAN cable into the right socket (LAN) of the PoE adapter and connect it to the router. Fig.: 3 Fig.: 4 The network connection of the IP security camera contains two control LEDs.
30 UK IRL Start Software installation The supplied software is only suitable for Windows systems. For installation on Mac systems, please read section ”Installation on Mac OS X“. The software must be installed on a computer connected to the same router as the IP security camera. 3. Place supplied software CD into CD/DVD drive of your computer. 4. The below selection menu should then appear automatically.
32 UK IRL Start Start UK IRL 33 4. Enter any name for the camera in the next window, describing, for instance, the location. 5. In the next step select Wireless network and set region to “Europe” and enter the key. 1. In the program IPCam Config call up the Setup assistant under “Settings”. 2. Select “Maginon IPC-100AC“ as camera model and click on “OK”. This calls up the existing settings of the camera. 3.
34 UK IRL Start Start UK IRL 35 Call up “supra space” cloud Entering link http://supra-space.de or http://supra-space.com in your Browser and open the start page of the Cloud. Enter user name specified in the Set-up assistant. The overview now lists all products of your IP camera. Select these to call up your camera. The following page then appears.
36 UK IRL Start Start UK IRL 37 Use camera through “supra space” Use app “Maginon IPC Viewer” Select symbol IPC-20C. The app “Maginon IPC Viewer” is available for your camera from the App Store and from Google Play. Load the app onto a Smartphone or a TabletPC and start app. to call up the image of your Maginon Using call up the Web surface of your camera. Log on with user name “admin” and without a password. You then have access to all settings of your Maginon IPC-20C.
38 UK IRL Start Manually setting up IP security camera In the subsequent graphics it is schematically shown how the IP security camera is integrated in your existing home network and how it is accessed from the Internet. External - Internet supra Internal - home network UK IRL 39 As the router is, however, protected from Internet access via Firewall a separate access must be set up for the IP security camera. This is referred to as Port forwarding.
40 UK IRL Start Ensure that the IP security camera is connected to the router via the network cable and is connected to the mains (see section Hardware Installation). A network connection between the computer and the router must also exist. Open the program supra IPCam Config. In the program select ”Start search“, to open a list of available IP security cameras.
42 UK IRL Start Start UK IRL 43 You can now remove the network cable between the IP security camera and the router. Do, however, note that the IP security camera has a different local address through the wireless connection than when connected via the network cable. Once restarted, the IP security camera must be searched for using the program supra IPCam Config and opened through “Browser”. Setting up the router Under “Region” select the region in which the surveillance camera will be used.
44 UK IRL Start 3. If the log-on page of your IP security camera opens automatically, access for the IP security camera has been set up automatically in the router. You can then continue the installation with section 5.7., Set up Domain name,. 4. Where automatic set up via the UPnP function is not possible, the respective access must be set up manually. This is referred to as Port forwarding. During this process, a single access is directly passed on to the IP security camera. Start UK IRL 45 6.
46 UK IRL Start Start UK IRL 47 In order to avoid problems the same internal and external port of the IP security camera should be chosen. Activate the IP security camera again using the program “supra IPCam Config”. Under “Settings” change to “Network settings” and change the value under “Port” also to 81. Save the changes. You should then be able to access the IP security camera via the camera as described at the beginning of this section. / xxx.xxx.xxx.xxx:81 access (xxx.xxx.xxx.
48 UK IRL Start Start UK IRL 49 • Password: Leave password field blank. • Connection mode: Select “Dynamic“ as connecting mode. 10. Click on “Apply“, to accept the changed settings. Next, restart the IP security camera to accept the changes. This operation takes around another 2 minutes. The IP security camera is now reachable under the registered address.
50 UK IRL Start Start UK IRL 51 6. In order to select the set-up IP security camera for display or editing, touch the respective entry in the list on the display. 7. A preview with camera image, processing functions and information of the selected IP security camera opens. 8. In order to obtain a full-size view of the camera image, touch the image in Preview or select “Display”. The Live image of the IP security camera is then shown as a full image. Installation on Mac OS X.
52 UK IRL Start Determine IP address of IP security camera Open Internet Browser “Safari“ and enter the previously determined IP address of the router. The configuration page of the router opens. Generally an option “DHCP table“ or “DHCP reservation“, can be found under Settings, which can be called up. You then receive a list of all devices in the network as shown in the below example. Please note that the illustration of the configuration of your router can differ from the one in the example.
54 UK IRL Start Start UK IRL 3. Connect the IP security camera to the computer using the network cable Read section Setting up the Router, and information contained on Internet page: 4. Use program supra IPCam Config to search for the IP security camera. http://www.ipc-info.com. 55 5. Under supra IPCam Config select camera and then the “address“ Internet connection via 3G/4G mobile phone networks. 6.
56 UK IRL Use Use UK IRL 57 Use Using with computer Activate IP security camera 1. First open your Browser program (Internet Explorer, Firefox, Opera, Google Chrome, Safari or similar). Next to it is the local IP address of the IP security camera. If you wish to access a IP security camera from a computer in the same network, you can also enter the local network address at this point. 2. Enter a User name and respective password to login. Next click on “Login“.
58 UK IRL Use Use UK IRL 59 As User you can call up the camera image but cannot set up the camera image or change the settings. • Mirror horizontally: Select this option to mirror the camera image horizontally. Setting the camera image • Mirror vertically: Select this option to mirror the camera image vertically. Under View enter the settings for the camera image.
60 UK IRL Settings Settings The below sections provide an overview of all possible options of the IP security camera. In case of problems during the installation or use or changing of the settings of the IP security camera, these sections contain information outlining the available options.
62 UK IRL Settings Setting current date and time Set the time zone of the IP security camera and whether date and time should be automatically updated via a NTP server (Time server). The correct time is, for instance, required for planning alarms or FTP transfers. Settings UK IRL 63 3. Synchronizes with NTP server: Select this option if the date and time are to be automatically updated via a NTP server. 4.
64 UK IRL Settings Settings UK IRL 65 Network settings In order to connect the IP security camera to an existing network or a router, network settings must be entered. The following authorizations are available for a user account: 1. Visitor: Visitors can only call up the camera image but can not change any settings. 2. Operator: As Operator you can set up the camera image (e.g. brightness and contrast) but cannot change any settings. 1.
66 UK IRL Settings The port of Web user interface should always be set to the same port as the external port of the IP security camera in the router. (see section 5.6.Setting up the router). Where automatic acceptance of new devices is not supported by your router, please deselect “Use DHCP“. Several ne input fields appear. Manually enter the access data of your network. Settings UK IRL 67 the computer for “Default Gateway“ (Standard gateway) is address 192.168.1.
68 UK IRL Settings UK Settings IRL 69 When “Uncoded“ is selected, data are not encoded prior to transmission. When using“WEP“, “WPA“ or “WPA2“ encoding, additional encoding information must be provided. Enter the same settings as shown for the router or access point. NOTE! −− Enter wireless network settings without changing. This is the only way to ensure the correct connection of the IP security camera.
70 UK IRL Settings UPNP settings Universal Plug and Play (UPnP) is used for controlling devices via an IP-based network. Where the router supports UPnP and where this function is activated, the required Firewall settings are automatically selected. 1. Select option “UPNP settings” from the bottom of the menu. UK Settings IRL 71 DDNS settings NOTE! −− These settings are only of importance where manual installation was selected. When using supra space, no further settings have to be entered.
72 UK IRL Settings Settings UK IRL 73 Change to DDNS settings of the IP security camera and select “Use DDNS“. First, enter a user name. This may only consist of small and capital letters, numbers or a hyphen. The user name is used for the Internet address of the IP security camera. Enter, for instance, the user name “ipcamera“ and, after registration, the IP security camera can be called up via address http:// ipcamera.supracam.net as soon as it is connected to the Internet.
74 UK IRL Settings Settings UK IRL A private email address can, for instance, be used or you can set up a separate email address for the IP security camera. • Server: Enter address of SMTP server of Email account. Select option “Mail settings” from the bottom of the menu and select “Use SMTP”. • Encoding: State the encoding used by the SMTP server. 75 • Port: Enter port of SMTP server. The standard value is 25. • Requires authentication: State whether the SMTP server requires authentication.
76 UK IRL Settings FTP settings The IP security camera offers the option to upload images to an FTP server once or regularly. Specify the required additional data for an FTP server to be used. 1. Select option “FTP settings” from the bottom of the menu and select “Use FTP”. Settings UK IRL 77 • Path: Enter the path under which images are to be stored on the FTP server. • Transfer mode: Select whether a passive or active FTP connection is to be requested for the transfer.
78 UK IRL Settings Specify max. number: In order to limit the number of files sa- ved on the FTP Server, you can also activate this option. • Number of files: Activate this option if images are to be stored on the FTP server. Once this number has been reached the oldest image will be deleted to allow saving of another image. To test entries for the FTP settings, click on “Test“. A single image is the transferred to the FT server. Click on “Apply“, to accept the changed settings.
80 UK IRL Settings 9. Report to HTTP: Activate this option if an HTTP address is to be called up in the event of an alarm. 10. URL: State the HTTP address to be called up in the event of an alarm. Click on “Apply“, to accept the changed settings. The changes to the alarm settings are saved without having to restart the IP security camera. UK Settings IRL 81 Restarting the IP security camera Click on “Restart now” to restart the IP security camera. This saves all entered settings.
82 UK IRL Potential legal infringements Declaration of conformity UK IRL 83 Protection of privacy Duty of notification Shown images may not infringe the privacy of others. Do not point camera onto the garden or entrance door of your neighbour, even if these locations are visible from your known home or public locations. This does not entitle you to publish respective photos or videos.
84 UK IRL Declaration of conformity UK Storing IRL 85 Technical specification Storing Model: IPC-20C Image sensor: 1/5“ CMOS sensor, 640 x 480 pixels When not in use please disconnect the IP security camera from the power supply and store it in a clean and dry place outside of the reach of children. Lens: F=2.4, f=3.6 mm, Infrared lens Infrared light: 24 Infrared LEDs Night vision: 20 m Minimum lighting: 0.
86 UK IRL Cleaning NOTE! Danger from incorrect operation! Incorrect use of the IP security camera can cause the IP security camera to be damaged. −− Do not use any aggressive cleaners, brushes with metal or nylon bristles or sharp or metallic cleaning objects, such as knives, hard spatulas and similar. These can damage the surface. −− Never place IP security camera in dishwasher. This would destroy the camera. 1. Pull out mains connector prior to cleaning. 2. Let IP security camera cool down completely.
88 UK IRL License declaration UK WARRANTY CARD The software is based on the software published on page http://sg-gpl.net/. IP security camera IPC-20C Your details: Name Address The listed software is licensed according to the conditions of GNU – General Public License. The sotware for this product was specifically adapted for the camera.
UK 90 IRL WARRANTY CARD Warranty Conditions Dear Customer! The ALDI warranty offers you extensive benefits compared to the statutory obligation arising from a warrant Warranty period: 3 years from date of purchase: Costs: Free repair/exchange No transport costs. Hotline: Free hotline. ADVICE: Please contact our service hotline by phone, e-mail or fax before sending in the device. This allows us to provide support in the event of possible operator errors.
