Operation Manual

7
1.4. Inserting the memory card or USB ash drive
Toplaybackimagesfromamemorycard,insertthememorycardintothememorycardslot(1)on
thebottom.AUSBashdrive,canbepluggedintothesideUSBconnector(2)oftheframe.
IswhenthepictureframeisswitchedonandamemorycardoraUSBstickisinsertedintothe
device,itwillautomaticallystartaslideshowfromthatstoragemedium.
Caution!: TheUSBconnectormaynotbeusedtoconnectthepictureframetoacomputer!
1.5. Switching on the Digital Picture Frame
Thepowerswitchislocatedonthebackoftheframe(see1inFigure1onthenextpage).Pressthe
powerbuttononthepictureframe.Allsupportedmedialeswillnowautomaticallybedownloaded
fromtheinsertedstoragemedium.Aftertheloadingplaybackwillbeginautomatically.
2
Note:
• Thisunitsupportsthefollowingtypesofmemorycards:SD/SDHC/MMC
• Furtherinformationaboutsupportedmemorycardsandleformatscanbefoundinthe
 productspecications.