Operation Manual

1. Quick Guide

1.1. Mains connection

Placeyourdigitalpictureframeonaatsurface.InserttheconnectorplugoftheACadapterinto

theDCINjackonthebottomofthepictureframeandtheACadapterintoanelectricaloutlet.

1.2. Installing the stand

Thebasestandisinthepackaging.

 1. Aligntheopeningofthestandabovethecorrespondingopeningontherearofthepicture

  frame.

 2. Byturningthestandyoucanoptionallysetupyourpictureframeverticallyorhorizontally.

  Hereby,thestandisalwaysata45°angletothebodyofthepictureframe.

 3. Attachthestandwiththeprovidedscrew.

1.3. Wall mounting

Youcanattachthepictureframetothewallwithscrewsandanchors.Inthebackofthehousing

therearecut-outsforeitherverticalorhorizontalwallmounting.

Note:

• CheckbeforepluggingintheACadapter,ifthespecicationsonthenameplatecorrespond

 tothoseofyourlocalpowergrid.