Operation Manual

8
Whenthepictureframeisturnedonforthersttime,amenuwillappearforthelanguage
selection.ChooseyourlanguageandconrmyourselectionbypressingtheOKbutton.

1.6. Control buttons
Thecontrolbuttonsofyourpictureframearelocatedabovethepowerbuttononthebackofthe
frame.Withthesekeys,allfunctionsoftheon-screenmenuscanbecalledupandoperated.Hereis
anoverviewofthekeys(seeFigure1):
 1. On/o switch: Toturnthepictureframeonando
 2. OK-button: Toconrmaselectionorsetting,tostopandstarttheslideshow
 3. Exit-button:Toexitthesub-menuortheslideshow
 4. Menu-button: Toopenthe"Settings"menuorasub-menu
 5. Up-button: Navigatethemenu
 6. Down-button: Navigatethemenu
 7. Left-button: Navigatethemenu
 8. Right-button: Navigatethemenu
Ifthecontrolbuttonsarepressedwhileviewingapictureoraslideshow,thepictureframewill
displaythecontrolpanelwithintheimageforafewsecondsintheupperrightcorner(Fig.2).
Fig. 2
Note:
• Incasethedevicedoesnotswitchon,initiallycheckifthewalloutletandmainsadapter
 areconnectedproperly.
• Toopenthelanguageselectionmenuagain,thepictureframemustbereturnedtothe
 factorydefaultsettingsinthe"Settings"menu.
Fig. 1