Operation Manual

16
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: CRB-100 PRODUCT CODE: 48144 12/2014
PTY - Programme type
This radio will allow you to select the type of program required, and will search for a station
broadcasting that type of program. Press and hold the PTY button once to show the music
type. Then press 1-6 button to choose the dierent music types available.
Press the PTY button twice to show the speech type program. Then press 1-6 button to
choose the dierent speech type program. Each number key will show 3 dierent speech
program for you to choose.
MASK DPI - MASK ALL
Press the sound select button for 2 seconds, the display will show "TA SEEK". Press the sound
select button again so that the unit will show "MASK DPI2. Rotate the encoder volume to
toggle between "MASK DPI" and "MASK ALL" mode. Then leave the unit idle for the mode
to take eect. During "MASK DPI" mode, the unit will mask only the AF which has dierent
PI, this is the default mode; during "MASK ALL" mode, the unit will mask the AF which has
dierent PI and no RDS signal with high eld strength.
RETUNE S/L - SHORT/LONG
This function is to set the initial duration of automatic TA Search -- Press and hold the
sound select button until “TA SEEK” is shown on the LCD, then press the SEL button to cycle
through the menu selections until “RETUNE_S” is shown, use the VOL +/- button to choose
“RETUNE_S” or “RETUNE_L”. The default is “RETUNE_S”.
PI sound
Press and hold the volume button until “PI SOUND” is shown on the LCD. Rotate the volume
button to choose between PI sound and PI mute.