Instruction Manual CD Car Stereo with Bluetooth® WARNING: This unit must be installed by a professional technician or the warranty will be void.
CD Car Stereo with Bluetooth® Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period o f 36 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
1 Dear Customer, Congratulations on purchasing a high quality Maginon product. You have decided on a CD Car Stereo with Bluetooth with excellent technical features, with the proper accessories and which is particularly easy to operate. Please read all instructions carefully and attentively and observe all the safety instructions. The device has a three year warranty. If the CD Car Stereo with Bluetooth should encounter a defect, you must present the enclosed warranty card and your purchase receipt.
2 2. Table of Contens 1. 2. 3. 4. 5. CONTENTS OF BOX TABLE OF CONTENS SAFETY AND WARNING NOTICES THIS IS YOUR DEVICE INSTALLATION AND WIRING CONNECTIONS 5.1. Before you install 5.2. Installation 5.3. Wiring connections 6. USE 6.1. Bluetooth operation 6.2. Basic operation 6.3. Radio operation 6.4. RDS Operation 6.5. USB/SD Operation 6.6. Aux in, RCA out 7. REMOTE CONTROL 8. CONFORMITY 9. STORAGE 10. DISPOSAL 11. WARRANTY AND SERVICE 12.
3 3. Safety and warning notices If the CD Car Stereo with Bluetooth and accessories are handled incorrectly, this can be a source of danger to yourself and others, or respectively damage or destroy the CD Car Stereo with Bluetooth. Please read and strictly observe the following hazard, safety and warning notices. WARNING: This unit must be installed by a professional technician or the warranty will be void. Intended use This CD Car Stereo with Bluetooth is intended for information and entertainment.
4 Electrical hazard If foreign objects or water have entered the CD Car Stereo with Bluetooth, turn it off. Let everything dry thoroughly. Otherwise there is a fire and electric shock hazard. If the CD Car Stereo with Bluetooth has been dropped or the housing is damaged, turn it off. Otherwise there is a fire and electric shock hazard. The CD Car Stereo with Bluetooth may not be taken apart, modified or repaired. There is a fire and electric shock hazard.
5 4. This is your device CD Car Stereo with Bluetooth Remote control incl.
6 Case for remote control unit 2 unlocking brackets ISO connecting cable Without illustration: Instruction manual Warranty certificate Service card AFTER SALES SUPPORT AUS 1800 623 432 MODEL: CRB-100 PRODUCT CODE: 48144 12/2014
7 5. Installation and wiring connections WARNING: This unit must be installed by a professional technician or the warranty will be void. 5.1. Before you install Automotive audio equipment installations can be troublesome at times, even to the most experienced of installation technicians.
8 4. Double check that you marked the first speaker correctly by checking that the speaker wires are the same at the head unit. 5. Repeat this procedure for all of the speakers. 6. Mark the power, ground, and any other wires also. 5.2. Installation Note: • Important! Disconnect negative battery terminal from battery before starting installation. Consult the vehicle’s owner’s manual for proper instructions. • Mark the polarity of the existing speaker wires before disconnecting battery.
9 Note: • Outer trim frame, hook, and mounting sleeve are not used for this installation. • This is only intended as a general guide; contact the vehicle’s manufacturer for specific instructions. • This method of installation uses the screw holes at the sides of the unit and the holes of the existing vehicle mounting bracket. 1. Remove the hooks on both sides. 2. Align the screw holes of the mounting bracket supplied with the car and the screw holes of the main unit.
10 5.3. Wiring connections Make sure that you have a good chassis ground. Good ground connections will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection. Fuse 10A OPERATING POWER: 12 VOLTS DC 10A CURRENT NEGATIVE GROUND RCA OUT left=white right=red Connector A 1.
11 Orange remote Connect to auto antenna or power amp control wire/remote connection. Maximum current 300Ma 12 V DC (Low Current). White panel light Connect to lighting circuit of vehicle. This will illuminate the buttons on the display for night time operation. This wire can also be connected to the orange remote wire to activate the buttons when the unit is powered on. Do not join the white wire to the lighting circuit of the vehicle if connected to the orange remote wire.
12 6. Use 6.1. Bluetooth operation Pairing The bluetooth of this radio is always in standby mode for pairing and connection, signalled by a blinking bluetooth icon on the LCD Display. At this blinking time, please run the bluetooth search and connect function in your cellphone. The car radio model no “BT car stereo” will be shown on the cellphone. Select this car radio and connect to finish the pairing. The bluetooth icon on the display will be on indicating that the connection is established.
13 6.2. Basic operation Tuning the unit On / Off Press POWER button to turn the unit on. Press and hold again to turn the unit off. Mode selection Press the MODE button to cycle through different play modes. Loudness control Press the SEL button repeatly until the display shows “LOUD ON” or “LOUD OFF”. Rotate the VOL button to adjust. When “LOUD ON” shown on the display indicates that loudness function is on. Mute control Press the PWR/MUT button to activate the Mute function.
14 Beep function Press SEL button until the “BEEP” shown on the screen. Rotate the VOL button to choose “BEEP OFF” or “BEEP ON”. “BEEP OFF” means Beep function is inactive. “BEEP ON” means beep sound will be heard when any button pressed. Clock Press and hold the SEL button, the clock will show on the display. Then press and hold the button until the hours blinks on the display, rotate the SEL knob to set hours, then press the SEL button until the minutes blinks and rotate the SEL knob to set.
15 While listening to a radio station you would like to save as a pre-set, press and hold one of the buttons numbered 1-6 until the preset station number is shown. The button you pressed is now the preset button for that station. Automatic store / Preset scan Automatic scan and store: While listening to the FM Radio, press and hold the F/PS button for 3 seconds. The receiver will automatically scan and save the station listening to.
16 PTY - Programme type This radio will allow you to select the type of program required, and will search for a station broadcasting that type of program. Press and hold the PTY button once to show the music type. Then press 1-6 button to choose the different music types available. Press the PTY button twice to show the speech type program. Then press 1-6 button to choose the different speech type program. Each number key will show 3 different speech program for you to choose.
17 6.5. USB/SD Operation Play MP3 / WMA from USB/SD Plug the USB or SD card into the USB/SD port. The MP3 and WMA files in the USB or SD card will be played automatically. If there is no MP3 or WMA files in the USB or SD card, “USB” or “CARD” will be shown on the screen. Play mode The USB or CARD mode can be chosen by pressing the MODE button. The "USB" means it is in USB play mode, while "CARD" means it is in SD play mode. Track / Folder search Press track.
18 9. Folder Down Press the button once to go back one folder. 10. Folder UP Press the button once to advance one folder. 6.6. Aux in, RCA out Auxiliary Input The Auxiliary Input Jack is on the front panel. Insert the Aux in cable’s stereo plug into the Aux in jack on the panel of the unit. Route the other end of the stereo plug to the headphone jack of any external audio device such as walkman and discman. Press the Mode button to choose Aux.
19 7. Remote Control 1 2 3 4 13 14 15 16 17 18 19 20 5 6 7 8 9 10 11 12 21 22 23 24 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24.
20 Operating the remote control Aim at the face panel of the MP3 Receiver, the maximum distance at which signals can be received is about 6M. Make sure that the signal path is not obstructed. Do not drop or throw the remote control. Do not place the remote control in a location that is exposed to direct sunlight or next to a heating unit or other heat source. 8.
21 10. Disposal For disposal, separate packaging into different types and dispose of in line with environmental regulations in supplied collection containers. Batteries and storage batteries may not be disposed of in domestic waste. Consumers are obliged by law to return used batteries to communal collection points or dealers selling batteries. Storage batteries and batteries do therefore contain the adjacent symbol. Correct disposal of product Your product has the symbol on the right.
22 11. Warranty and Service Our service outlets will be happy to assist you in case of problems with the operation of the device or with any queries and problems. The device comes with a manufacturer´s warranty of 3 years. Please see enclosed Warranty Card for details. Please contact our hotline prior to returning a defective device.
23 12. Technical specifications Element Description Model Maginon CRB-100 Operating Power 12 Volts DC, negative ground Output Wiring Designed for using four speakers only RCA line out Low-level outputs - 1000MV Output Impedance Compatible 4 to 8 Ohm speakers Fuses 10 amp Dimensions 178mm (W) x 78mm (D) x 51mm (H) Weight 0.65 kg FM Tuner Tuning Range 87.
CD Car Stereo with Bluetooth® Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier for repair.
supra Foto-Elektronik-Vertriebs-GmbH Denisstr.
