Operation Manual

16
Power frequency:
Set the mains frequency to the mains frequency of your local power supply grid either to 50 or
60 Hz. This prevents  ickering when using the Car Black Box under arti cial light conditions. 50
Hz is the required frequency of the local power supply in Australia. The default setting of the
power frequency in the Car Black Box is 50 Hz.
Power Save:
1min The CBB 2 switches off if no button has been pressed for 1 minute.
3min The CBB 2 switches off if no button has been pressed for 3 minutes.
5min The CBB 2 switches off if no button has been pressed for 5 minutes.
OFF Automatic switch-off is deactivated.
Panel Protect:
30s The display switches off if no button has been pressed for 30 seconds.
1min The display switches off if no button has been pressed for 1 minute.
2min The display switches off if no button has been pressed for 2 minutes.
OFF The display remains permanently switched on.
Date & Time:
Set the date and time by selecting the value to be changed with the MODE button and change
value using the UP and DOWN buttons. Con rm settings by pressing the OK button.
Language:
Select the desired menu language by pressing the UP and DOWN button and con rm your
selection by pressing the OK button.
TV Out:
NTSC For playing back recordings on a NTSC standard TV.
PAL For playing back recordings on a PAL standard TV.