Operation Manual

AFTER SALES SUPPORT

AUS

1800 623 432

MODEL: BR-3 PRODUCT CODE: 47091 10/2014

5. Use

4.1. Power supply

1. Connect the AC adaptor to the DC inlet of the unit.

2. Connect the AC adaptor to a properly installed wall socket.

Note:

• Whenever the adaptor is used, the lithium battery is automatically charged. To

work with the lithium batteries, check that the AC plug is detached from the

DC inlet of the unit.

• Unplug the adaptor from the mains and the unit, when the unit is not used for

a longer period of time.

4.2. Charging the battery

Prior to using the MAGINON Tradesman Radio BR-3, the integrated lithium polymer

battery must be charged.

1. Plug in the adaptor to the DC adaptor jack.

2. The radio will begin to charge. The LED will light up to indicate it is fully charged.

4.3. USB charging

The upper USB slot can be used to charge mobile devices when needed.

1. Plug in the USB cable to the radio with the right connector on the other end that

matches with your mobile device.

2. Your device should indicate that it is being charged (please refer to the instruction

guide of your mobile device for further information).

4.4. Using the radio

1. Turn on the radio by using the Volume knob and turning to the right. When you

hear a click sound and the LED indicator lights up, then the Tradesman Radio BR-3

is turned on.