Data Sheet

!
Application Method:
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
Step 1: Shake it like you mean it.
NB! Shaking too much might cause
bubbling. This does not negatively affect
adhesion but will not provide a mirror finish
on the bottom of the print.
Step 2: Press nib against the surface.
NB! The Magigoo container is spring
activated. Pressing the bottle without
pressing the nib against the bed may
results in applicator popping off and
product wastage.
Step 3: Apply to Desired area
NB! The best and most reliable
performance is achieved when applied as
a thin layer. This means that cleaning and
re-applying between prints is
recommended especially on longer prints
or hard to print with materials.
Step 4: Print
NB! After print, wait until the build plate is
cool to remove prints easily.
Step 5: Clean
NB! For cleaning - Just wipe off with a
damp cloth. Yes, it’s that easy.
3
Spring activated
valve inside
Press to get adhesive flow