Data Sheet

!
Description:
MAGIGOO® is an all-in-one 3D printing adhesive that offers sure adhesion with easy
release. Magigoo is an easy to use 3D printing adhesive designed to reduce warping
in FDM/FFF 3D printers. Warping, among other factors, is caused by the differential
cool of a print during a 3D printing process. A heated bed could help reduce warping
but for printing repeatability and reliability a sure adhesion method such as Magigoo
is needed.
Technical specifications:
‣
Appearance: clear-faint yellow liquid
‣
Odour: faint odour
‣
Consistency: low-med viscosity
‣
Solvent: water
‣
Decomposition: extended periods exceeding 120 °C
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
Properties:
Magigoo acts as a thermally activated interfacial layer, allowing for better
interactions, both at the micro and molecular level, between the printing bed and the
printing materials. It is recommended to print according to the printing temperatures
recommended by the filament supplier. The printing conditions vary between one
printer and another. If no recommendations are given by the filament supplier the
following bed temperatures can be followed:
Intended use:
To be used on FDM/FFF 3D printers with a heated bed on aluminium, glass surfaces.
Also works when applied on sheets e.g. Kapton, PEI and similar. To be used with
common plastics e.g. PLA, ABS, HIPS, PETG, TPU.
1