Data Sheet

ManualsBrandsMagigoo Manuals3D Printer Spares & Accessories1933327

Magigoo 3D Printing Adhesive

Technical Data Sheet*

*This document has been conscribed to the

best of our knowledge. Veriﬁcations should be

made to conﬁrm details when necessary.

Ver 1.0 Sept 2018

- CONTENT

- Description (p1)

- Technical Speciﬁcations (p1)

- Intended Use (p1)

- Properties (p2)

- Application Method (p3)

- Storage and Handling (p4)

- Package formats (p4)

Summary of content (5 pages)

PAGE 1
Magigoo 3D Printing Adhesive Technical Data Sheet* Ver 1.0 Sept 2018 - CONTENT Description (p1) Technical Specifications (p1) Intended Use (p1) Properties (p2) Application Method (p3) Storage and Handling (p4) Package formats (p4) *This document has been conscribed to the best of our knowledge. Verifications should be made to confirm details when necessary.
PAGE 2
Description: MAGIGOO® is an all-in-one 3D printing adhesive that offers sure adhesion with easy release. Magigoo is an easy to use 3D printing adhesive designed to reduce warping in FDM/FFF 3D printers. Warping, among other factors, is caused by the differential cool of a print during a 3D printing process. A heated bed could help reduce warping but for printing repeatability and reliability a sure adhesion method such as Magigoo is needed.
PAGE 3
Filament Bed Temperature (°C) ABS 90-110 PLA 40-70 PETG 80-100 HIPS 90-115 TPU 30-60 To find the best temperature one could start from the lower end of the recommended settings and increase the bed temperature in 5 °C increments. This should be done with standardised calibration prints. An additional benefit of Magigoo, being thermally activated, is that it will release the print upon cooling.
PAGE 4
Application Method: Step 1: Shake it like you mean it. NB! Shaking too much might cause bubbling. This does not negatively affect adhesion but will not provide a mirror finish on the bottom of the print. Step 2: Press nib against the surface. Spring activated valve inside NB! The Magigoo container is spring activated. Pressing the bottle without pressing the nib against the bed may results in applicator popping off and product wastage.
PAGE 5
Package formats: Sample Pack 2 mL – multilayer packaging sachets. Designed for a one-time use. Also come with additional instructions which double as an applicator. General Desktop Bottle 50 mL – Foam head applicator with an HDPE actuator valve house in a HDPE system. Bottle is an HDPE/LDPE Blend allowing for the user to control the flow. Targeted at printers with beds less than 0.04 m2. Large format Bottle 120 mL – Foam head applicator with an HDPE actuator valve house in a HDPE system.