Instructions

Application Method:
Step 1: Shake the bottle vigorously.
Step 2: Press nib against the surface.
NB! The Magigoo – Metal container is spring activated. Pressing
the bottle without pressing the nib against the bed may result in
applicator popping off and product wastage.
Step 3: Apply to Desired area
Step 4: Print
NB! Ensure proper bed calibration. Having nozzle too close to
bed surface may cause excess adhesion, this can potentially
cause the printed part to be more difficult to remove from the
build-plate.
After printing, completely submerge the build-plate in water or
soak around the part, after some time, usually between 30
minutes and a couple of hours, the part should come off on its
own.
Step 5: Clean
NB! Just wipe off with a damp (water) cloth if any residue is left
on the build-plate after part removal.
Spring activated valve
inside
Press to get adhesive flow
* Images are illustrative.
*
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
3