Instructions

Description:
Magigoo® - Metal for Ultrafuse® 316L, is an all-in-one 3D printing adhesive
that offers sure adhesion with easy part removal for BASF Ultrafuse® 316L
filament. Magigoo - Metal, has been specifically formulated for BASF
Ultrafuse® 316L filament to ensure reliable first layer adhesion whilst also
being non-hazardous and compliant with the filament post processing
methods. Warping, among other factors, is caused by the differential
cooling of a print during the 3D printing process due to the thermoplastic
nature of the filament binding materials. For printing repeatability, reliability
and sure adhesion, Magigoo® - Metal is needed.
Technical specifications:
‣
Appearance: clear-faint yellow liquid
‣
Consistency: low viscosity
‣
Solvent: water
Properties:
Magigoo® - Metal, acts as a thermally activated interfacial layer, allowing
for better interactions, both at the micro and molecular level, between the
printing bed and the printing materials. It is generally recommended to
print according to the printing temperatures recommended by the filament
supplier. For use with BASF Ultrafuse® 316L a build-plate temperature of
90-110 °C is recommended, nonetheless, the printing conditions might vary
between one printer and another. It is always recommended to determine
the ideal build-plate temperature of the printer prior to printing green parts
with BASF Ultrafuse® 316L.
Intended use:
To be used on FDM/FFF 3D printers with a heated bed on glass surfaces.
Magigoo Metal is intended for use with BASF Ultrafuse® 316L FDM filament
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
1