Instructions

ManualsBrandsMagigoo Manuals3D Printer Spares & AccessoriesMagigoo glue stick for Ultrafuse 316L, 50 ml M3PEN-U316L

magigoo.com

Magigoo Pro Metal for

Ultrafuse 316L

3D Printing Adhesive

Technical Data Sheet*

*This document has been conscribed to the

best of our knowledge. Veriﬁcations should be

made to conﬁrm details when necessary.

Ver 1.0 December 2019

Summary of content (4 pages)

PAGE 1
Magigoo Pro Metal for Ultrafuse 316L 3D Printing Adhesive Technical Data Sheet* Ver 1.0 December 2019 *This document has been conscribed to the best of our knowledge. Verifications should be made to confirm details when necessary. magigoo.
PAGE 2
Description: Magigoo® - Metal for Ultrafuse® 316L, is an all-in-one 3D printing adhesive that offers sure adhesion with easy part removal for BASF Ultrafuse® 316L filament. Magigoo - Metal, has been specifically formulated for BASF Ultrafuse® 316L filament to ensure reliable first layer adhesion whilst also being non-hazardous and compliant with the filament post processing methods.
PAGE 3
To find the best temperature one could start from the lower end of the recommended settings and increase the bed temperature in 5 °C increments. This should be done with standardised calibration prints. An additional benefit of Magigoo® - Metal, being highly water soluble, is that the green part can be easily removed after soaking the build-plate in water for 30 minutes to a couple of hours (depending on size). This ensures that the part is not damaged when being removed.
PAGE 4
Application Method: * Images are illustrative. Step 1: Shake the bottle vigorously. * Step 2: Press nib against the surface. NB! The Magigoo – Metal container is spring activated. Pressing Spring activated valve inside the bottle without pressing the nib against the bed may result in applicator popping off and product wastage. Press to get adhesive flow Step 3: Apply to Desired area Step 4: Print NB! Ensure proper bed calibration.