Instructions

!
Application Method:
Step 1: Shake the bottle vigorously.
Step 2: Press nib against the surface.
NB! The Magigoo – High Temperature container is spring
activated. Pressing the bottle without pressing the nib against
the bed may result in applicator popping off and product
wastage.
Step 3: Apply to Desired area
Step 4: Print
NB! Ensure proper bed calibration. Having nozzle too close to
bed surface may cause excess adhesion damaging the bed.
After printing, wait until the build plate is cool to remove prints
easily.
Step 5: Clean
NB! Just wipe off with a damp (water) cloth.


Spring activated valve
inside



3
Press to get adhesive flow
* Images are illustrative.
*
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
3