Instructions

Description:
MAGIGOO® - High Temperature, is an all-in-one 3D printing adhesive that offers sure
adhesion with easy release for high temperature engineering filaments, with a
specific focus on PEEK. Magigoo - High Temperature, has been specifically
formulated for high temperature filaments to ensure that it provides an easy to use
solution to reduce warping in FDM/FFF 3D printers. Warping, among other factors, is
caused by the differential cooling of a print during the 3D printing process, especially
on high temperature filaments. For printing repeatability, reliability and sure
adhesion, MAGIGOO® - High Temperature is needed.
Technical specifications:
‣
Appearance: clear-faint yellow liquid
‣
Consistency: low viscosity
‣
Solvent: water
‣
Decomposition: Extended periods exceeding > 150 °C
Properties:
MAGIGOO® - High Temperature, acts as a thermally activated interfacial layer,
allowing for better interactions, both at the micro and molecular level,
between the printing bed and the printing materials. It is generally
recommended to print according to the printing temperatures recommended
by the filament supplier. The printing conditions vary between one printer and
another.
Intended use:
To be used on FDM/FFF 3D printers with a heated bed on glass surfaces. Also works
when applied on sheets e.g. High temperature Garolite, Kapton, PEI and similar.
Magigoo High Temperature is tested to work to temperatures of 150 °C.
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
1