Magigoo Pro High Temperature 3D Printing Adhesive Technical Data Sheet* Ver 1.0 August 2019 *This document has been conscribed to the best of our knowledge. Verifications should be made to confirm details when necessary. magigoo.
Description: MAGIGOO® - High Temperature, is an all-in-one 3D printing adhesive that offers sure adhesion with easy release for high temperature engineering filaments, with a specific focus on PEEK. Magigoo - High Temperature, has been specifically formulated for high temperature filaments to ensure that it provides an easy to use solution to reduce warping in FDM/FFF 3D printers.
To find the best temperature one could start from the lower end of the recommended settings and increase the bed temperature in 5 °C increments. This should be done with standardised calibration prints. An additional benefit of MAGIGOO® - High Temperture, being thermally activated, is that it will release the print upon cooling.
Application Method: * Images are illustrative. Step 1: Shake the bottle vigorously. * Step 2: Press nib against the surface. NB! The Magigoo – High Temperature container is spring activated. Pressing the bottle without pressing the nib against the bed may result in applicator popping off and product wastage. Spring activated valve inside Press to get adhesive flow Step 3: Apply to Desired area Step 4: Print NB! Ensure proper bed calibration.
