Instructions

[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
An additional benefit of MAGIGOO® - Flex, being thermally activated, is that
it will enable the print to be easily removed upon cooling. Keep in mind that
different printers, print surfaces or filaments will behave differently. Some
flexible materials can also be removed by applying water around the
printed part – we recommend that you take the build surface out of the
printer prior to this step! After waiting for the water to penetrate between
the part and the build surface and one can easily remove the part
Cleaning and re-applying between prints is recommended especially on
longer prints or hard to print with materials.
Storage and Handling:
MAGIGOO® - Flex, should be stored in a cool dry place away from direct sunlight.
After use MAGIGOO® - Flex should be stored in an upright position and with the
cap on.
Excess MAGIGOO® - Flex on the nib can cause the applicator adhering to the cap.
To prevent this, make sure no excess MAGIGOO® - Flex remains on the rim of the
applicator after use.
If not capped the MAGIGOO® - Flex applicator will dry up. In such a case just rinse
with water.
2