Magigoo Pro 3D Printing Adhesive for TPEs Technical Data Sheet* Ver 1.0 September 2019 *This document has been conscribed to the best of our knowledge. Verifications should be made to confirm details when necessary. magigoo.
Description: MAGIGOO® - Flex (Flexible filaments – TPUs, TPEs), is an all-in-one 3D printing adhesive that offers sure adhesion with easy removal for flexible materials. MAGIGOO® - Flex, has been specifically formulated for flexible filaments to ensure that it provides an easy to use solution to reduce warping in FDM/FFF 3D printers. Warping, among other factors, is caused by the differential cool of a print during a 3D printing process.
An additional benefit of MAGIGOO® - Flex, being thermally activated, is that it will enable the print to be easily removed upon cooling. Keep in mind that different printers, print surfaces or filaments will behave differently.
Step 1: Shake the bottle vigorously. NB! Shaking too much might cause bubbling. This does not negatively affect adhesion but does not provide a mirror finish on the bottom of the print Step 2: Press nib against the surface. NB! The Magigoo – Flex container is spring activated. Pressing the bottle without pressing the nib against the bed may result in applicator popping off and product wastage. Step 3: Apply liberally to desired area NB! For better adhesion of challenging prints, apply one layer first.
