Instructions

MAGIGOO® is best stored
upright and away from direct
sunlight. MAGIGOO® was
specifically designed for
mobility, which is good news
if you want to take it with you
on-the-go or even on a flight as
hand luggage.
MAGIGOO® has been designed
and tested to work with PLA and
ABS plastics. As the composition
of each plastic is a little
different, the ideal settings for
MAGIGOO® may vary. Here are
the recommended temperature
ranges for effective application.
Bed temperature
PLA 40 - 60 °C
ABS 90 - 110 °C
After your prints have finished
and popped off, clean the cool
printing bed by wiping it with a
damp cloth.
If you like MAGIGOO® then help
us spread the magic. Share your
love online, on blogs, Twitter,
Facebook or Instagram (just
don’t forget to tag us @magigoo).
We’re also happy if you just tell
your friends. Either way, we’re
waiting for your feedback.
Where to send feedback
We want to learn more about
your experiences. We’re here
for good and bad. Get in touch
by emailing us at feedback@
magigoo.com. Let’s improve
Magigoo together.
MAGIGOO® works with (ABS
& PLA). The adhesive makes
sure prints stick firmly when
the print-bed is hot and then
releases as soon as it’s cools.
This unique and innovative
mechanism means that no tools
are needed to remove prints
from the bed. They just pop off
when things are cool to go.
It’s best to apply MAGIGOO® when the printing bed is still cold, but it will also work when the printing bed is already hot. Make
sure to use MAGIGOO® with the suggested plastics and with a correctly levelled bed and suitable printing settings. See our
recommended settings below.
1 Shake the MAGIGOO® pen like
you mean it.
2 Press the nib (end of your
pen) on the printing bed for
MAGIGOO® to flow.
3 Spread the adhesive evenly on
the printing area (cover your
bed with an even thin layer).
4 Make sure that no spots are
missed.