Operating Instruction

Product safety guide
To ensure the best performance of your equipment and to avoid
dangerous or illegal conditions before using and operating the
equipment, please consult and follow all safety information.
Please use the device at a temperature between 0 °C and 35 °C
and store the device and its accessories within the
temperature range of -20 °C to +45 °C. When the ambient
temperature is too high or too low, it may cause equipment
failure.
When charging the device, the power outlet should be
installed near the device and should be easily accessible.
Do not leave the battery in a discharged or unused state for a
long time. Do not short circuit. Your device may have a built-in
rechargeable battery that cannot be replaced. Battery life
varies by usage. Disused batteries should be disposed of in
accordance with local laws. If you do not have the relevant
laws or regulations, discard your device in a trash can for
electronic devices. The battery should be placed away from
children.
Use only accessories approved by the device manufacturer
and compatible with this model. If other types of accessories
are used, the device warranty may be violated and the
regulations of the country in which the device is located may
result in a safety incident. For approved accessories, please
contact an authorized service center.
Do not expose the device and its battery to high temperatures
or around hot devices. Overheating of the battery can cause an
explosion.
Using an unapproved or incompatible power source, charger
or battery may cause fire, explosion or other hazards.
Please refer to the illustrated
location for the local ID and
password.
Scan the QR code or search for "App Name" in the mobile app
store to download the app.
Open the box and place the cat (Magic Amiti) on a smooth and
tidy table in a brightly lit environment. Remove the small fish
eye mask on the top of the cat (Magic Amiti) before use.
After successfully installing the app, first connect the phone to
the Wifi of the cat (Magic Amitixxxxx), xxxxx refers to the random
Wifi name of each cat. After the connection is successful,
launch the app to interact with the cat.
* If the cat (Magic Amiti) automatically returns to the charging
post, it is necessary to keep the charging post connected to the
power supply and it is not blocked by the object.
* If you want the Magic Amiti to interact with the game base, you
need to keep the battery in the base installed correctly and have
electricity. Make sure the cat and the base are on the same
smooth and clean table and keep the light bright.
* During the operation of the cat (Magic Amiti), you can answer
the phone normally and send and receive text messages, but
you cannot connect to the Internet.
* When the cat is awake (the cat's eye is lit), the app will be
connected to the cat and can interact. When the cat is in a dream
state (the cat's eye is in the off mode), the cat must be placed in
the charging post to wake up, reconnect to the wifi, and then
open the app to interact.
When the cat (Magic Amiti) is low, it will automatically look for
the charging post and charge it.
Director mode: Through the app settings in the app, the cat
(Magic Amiti) can make a user-specified action or expression
when seeing someone, and can also express the language set by
the user.
Game mode: Place the phone on the base of the game base.
The Magic Amiti will automatically find and stay close to the
base to play games with the user.
Pet Mode: As the number of interactions between the Magic
Amiti and the user increases, it will give a special sound or
pet-like behavior to a familiar user.
Install the battery in the game base
Connect the charging post to the power supply and place the cat
(Magic Amiti) securely on the charging post.
When the eye of the cat (Magic Amiti) is lit, it indicates that the
device (Magic Amiti) is awakened.
Hardware check and preparation
App download and launch
Interaction (application, game)
Remove the fisheye protective film
Open the battery
compartment cover
Awakening mode (eyes lit)
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may
cause undesired operation.
2.Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if not
installed and used in accordance with the instructions,may cause harmful interference
to radio communications. However,there is no guarantee that interference will not
accordance in a particular installation. this equipment does cause harmful interference
to radio or television reception,which can be determined by turning the equipment off
and on,the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an autlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Magic Amiti FCC ID:2AVC3-DMP2020EE
AMITI-2020 MT FCC ID:2AVC3-AMITI2020MT
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be coÿlocated or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator &you body.