Installation Instructions

Step 1: Release the lever on each drawer slide (push the lever on the left
drawer slide downward and the lever on the right drawer slide upward) to
release the drawer from the cabinet. NOTE: to remove the drawer, hold the
lever in place and firmly pull the drawer out.
Drawer slide
Drawer
front
Drawer slide
Drawer slide
Screws
Lever
Step 2: Using a Phillips screwdriver, loosen the screws that fasten the
drawer slide to the drawer. Shift the drawer slide as needed (up or down / in
or out). Re-tighten the screws and repeat for the opposite side as neces-
sary. To place the drawer back into the cabinet, align the drawer slides with
the cabinet slides and push firmly until the drawer is secured into place.
Lever
Figure 3 - Adjusting Drawer Slides
Magick Woods Exports Pvt. Ltd. Customer Service:
Phone: [phone] • Fax: [phone] • Email: [e-mail]
Side adjustment:
Using a Phillips screwdriver, rotate screw (1)
clockwise to move the door left and
counter-clockwise to move the door right.
Moves the door up to 2 mm.
Depth adjustment:
Using a Phillips screwdriver, rotate screw (2)
clockwise to move the door forward and counter-
clockwise to move the door backwards.
Moves the door up to 2 mm.
Height adjustment:
Using a Phillips screwdriver, rotate screw
(3) clockwise to move the door upward and
counter-clockwise to move the door
downward. Moves the door up to 2 mm.
Figure 2 - Adjusting Hinges