Installation Instructions

Tools required for assembly (not included):
• electric drill with #2 drill bit (A)
• (x6) #4 x 3/4” screws (B)
• (x3) L-brackets (C)
Estimated installation time: 10 minutes
PREPARATION
INSTALLATION -
For all Elements collections: product images are for reference only
PACKAGE CONTENTS
CARE & MAINTENANCE
• To maintain the beauty of the furniture nish, avoid placing the cabinet in direct sunlight.
• Avoid exposing the cabinet to extreme temperatures by installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the cabinet immediately with a clean, soft and dry cloth.
Filler strip (x1)
Questions? Call our customer service department at
1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday
or e-mail: [e-mail].
FILLER STRIP
INSTALLATION INSTRUCTIONS
If installing between a vanity base and a wall:
1) Attach the (x3) L-brackets (C - not included) to the ller strip as shown in gure 1, using (x3) #4 x 3/4” screws (B - not included).
2) Place the ller strip on the side of the vanity base that meets the wall, aligned with the front edge of the vanity base (or set back as
desired), as shown in gure 2.
3) Secure the ller strip to the side of the vanity base by inserting (x3) #4 x 3/4” screws (B - not included) through the L-bracket holes into
the cabinet, as shown in gure 2.
4) Secure the vanity base to the wall, following the installation instructions provided with the cabinet.
If installing between a vanity base and a linen cabinet:
1) Attach the (x3) L-brackets (C - not included) to the ller strip as shown in gure 1, using (x3) #4 x 3/4” screws (B - not included).
2) Place the ller strip on the side of the vanity base, aligned with the front edge of the vanity base (or set back as desired), as shown in
gure 2.
3) Secure the ller strip to the side of the vanity base by inserting (x3) #4 x 3/4” screws (B - not included) through the L-bracket holes into
the cabinet, as shown in gure 2.
4) Secure the vanity base to the wall, following the installation instructions provided with the cabinet.
5) Place the linen cabinet against the wall, with its side ush against the open side of the ller strip.
6) Secure the linen cabinet to the wall, following the installation instructions provided with the cabinet.
Figure 1
Figure 2. Applies to all Elements
collections. Brighton model illustrated.