User Manual

User Documentation MAGICFX® Stage Flame
Page 15
If you use a gas bottle, ensure that it is
located on a safe flat surface beyond the
reach of other heat sources.
Fit the reducer onto the gas bottle.
Use the appropriate spanner to connect
the reducer and ensure that no gas can
escape.
Ensure that the gas bottle cannot topple.
This would allow liquid gas to enter the
Stage Flame.
9.
The temperature will rise after the Stage
Flame has been is use for a period of time.
So always let the Stage Flame cool off
before replacing the aerosol can. Always
remember that escaping gas can ignite at
high temperatures.
After you have inserted/replaced the
aerosol can, shut the cover of the Stage
Flame and secure the fasteners on the
side.
8.
The aerosol cans are described elsewhere in
this manual.
Screw the aerosol can into the holder until it
is securely locked in place. Ensure that it is
securely in place.
Only replace an aerosol can during a
show when the Stage Flame is set to
“safe mode”.
Consult the DMX settings to see how the
Stage Flame can be put into “safe mode”.
7.