User Manual

Version 1.0
Page 8
6. SAFETY
6.1 INTRODUCTION
The Power Shot has been designed and constructed in such a manner that it can be used safely. This
applies to the use, the circumstances and the regulations as described in this documentation. Reading
this documentation and following the instructions are therefore necessary for everyone who is
authorised to work with the Power Shot.
The Power Shot must be placed and used in surroundings that preferably:
- Have a reasonably stable temperature of between 0 and 30ºC.
- Have a relative humidity degree of no more than 75%.
- Are reasonably free of dust, corrosive gases and high concentrations of organic vapours.
- Are not situated in the vicinity of a source of vibration.
6.2 GENERAL SAFETY RULES
- Only use the Power Shot if there are no people, animals or other objects in the direction of the
electric cannon within the output distance. The shooting direction is the direction in which the
electric cannon in the Power Shot is pointed. The output distance depends on the content and
length of the electric cannons.
- Make sure that children, unauthorised people and animals do not obtain access to the Power
Shot!
- Do not take hold of the Power Shot while it is working or is switched on. Also, when the Power
Shot is not working, the electric cannon may still be filled.
- Safety devices may not be removed or disabled.
- All required safety devices must be in good condition and function properly.
- Ensure sufficient lighting of the surroundings.
- Keep the workplace clean.
- Only authorised persons may carry out work with the Power Shot.