User Manual

User documentation MAGICFX® Power Shot
Page 17
13. TROUBLESHOOTING
- The machine does not turn on.
Check if the powerCON cable is properly connected.
- A cannon does not work.
Check if the connector of the cannon is properly connected. If so, exchange the cannon with another
and see if this one works.
- The output is not 12VAC
The electronics in the Power Shot will fully be activated when a load like a cannon is attached.
- The Power Shot is still malfunctioning after troubleshooting
Always contact your dealer or the technical service of MAGIC FX first in case of uncertainties,
questions about the Power Shot works or other issues with regard to the Power Shot.
14. TECHNICAL SPECIFICATIONS
Measurements
and weight
Length:
150mm (5.9“)
Width:
145mm (5.5“)
Height:
166mm (6.5“)
Weight:
1.7 (3.75lbs.) without cannon
Power
Input:
AC 230V~50-60Hz
Output:
AC 12V~50-60Hz
Usage:
100W
Fuse:
Short circuit security
Design and product specifications can be changed without prior notification.
15. MAINTENANCE
To achieve the maximum service life of the Power Shot you must regularly clean the Power Shot and
test if it is working correctly.
Should the Power Shot not work for some reason then please contact MAGIC FX.
DANGER WARNING:
Do not replace parts yourself; always consult MAGIC FX if necessary.
16. GUARANTEE
A manufacturer's guarantee of 3 years applies to the MAGIC FX Power Shot.
- The guarantee expires if the Power Shot is used for improper purposes and for applications which
are not stated in this manual.
- The guarantee also expires if the machine is used incorrectly or in violation of the regulations.
- The guarantee expires if the machine is altered without permission from the supplier.