User Manual

User documentation MAGICFX® CO2 Jet
Page 13
8.
When the system is properly connected
you can open the valve of the CO2 bottle.
Check for leaks.
When the gas hose is not properly
connected gas can escape.
If this is the case then turn the couplings
tighter until gas is no longer escaping.
The CO2 Jet is now ready for use.
7.
Connect the other end of the hose to a
CO2 bottle (with dip pipe).
Turning it by hand will suffice! You should
only use a wrench if the coupling continues
to leak.