User Manual

Version 1.0
Page 12
6.
Connect the hose to the CO2 Jet and
secure this with, for example, an open-
ended spanner (size 22).
5.
In order to test, you first need to check if
the gas valve on the CO2 bottle is still in
a closed position. Now you can check if
the CO2 Jet has been installed properly
by switching the electricity on and off.
If the system has been connected
properly you will hear a clicking sound
which is produced by the opening and
closing of the magnetic valve in the CO2
Jet.
4.
The CO2 Jet is activated as soon as it is
powered by a 230V electricity source.
Use a 230V plug and make sure that the
electricity is switched off!
Now plug the CO2 Jet into the electricity
socket.
3.
If required you can adjust the blow pipe
to change the direction of the output.
Ensure at all times that the coupling of
the blow pipe is firmly tightened with an
open-ended spanner.