User Manual

User documentation MAGICFX® CO2 Jet
Page 11
10. INSTALLATION
CAUTION:
The machine can be damaged if you do not follow the procedures
carefully.
DANGER WARNING:
The MAGICFX® CO2 Jet may only be installed by adults and
authorised persons.
DANGER WARNING:
MAGIC FX is not liable for working with CO2 gas and CO2 bottles or for
the correct use thereof.
Exclusively use approved CO2 bottles (liquid carbon dioxide with dip
pipe) and consult your gas supplier about the installation, instructions,
guidelines and regulations for the safe use of the CO2 bottles.
For installing the CO2 Jet work in the following manner:
2.
Place the CO2 Jet on a solid and even
surface and screw it down (there are 4
screw holes in the base plate). Use 4
screws of a length of at least 5cm and
screw them in the holes intended for this
in the base plate of the CO2 Jet.
1.
Place the CO2 Bottle on a stable and
even surface and secure it by means of
an approved strap or bottle clamp. Place
the bottle in such a position that the
valve opening does not point in the
direction of the public.
Place the CO2 bottle preferably outdoors
or in a properly ventilated space with a
CO2 detection system.
The maximum temperature in the
surrounding area should be 30ºC!
Consult your gas supplier for full instructions
with regard to CO2 gas use.