Specifications
With both receiver and transmitter connected to the MagicBox, key the transmitter several times and
assure that the receiver is being muted except for the sidetone and the transmitter is keying properly.
[ ] Write down your results/observations_________________________________________________
_________________________________________________________________________________
Replace the dummy load with a suitable antenna and try the system on the air. Confirm that the
receiver is being muted except for the side tone and the transmitter is keying properly.
[ ] Write down your results/observations_________________________________________________
_________________________________________________________________________________
This completes the assembly and testing of the MagicBox. If you are going to operate it without a
case, put some rubber feet on the bottom of the PCB to keep it up off of the table so that
something isn't inadvertently shorted out.
15