User manual

www.ultramagicard.com
RIO 2e, TANGO 2e & TANGO +L Printers USER MANUAL
Page 6 of 44
2. Installing the UltraDriver
Installing to USB
1. Important - Make sure the printer is switched off.
2. Load the driver CD ROM into the PC you have connected to the
printer.
If the CD does not run automatically, click the start button, then click
on “run”. Type “D:\autorun” (where D is the drive letter for your CD
drive), then press the return key.
The driver CD ‘Splash Screen’ will appear.
Select your printer model – Rio 2e or Tango 2e or
Tango +L.
3. Select the “Install Software” option
4. Then select the “Install Driver” option
The driver installation will begin and the driver
installation window will open
5. Ensure that the “Install driver ready for USB” option
is selected, then press ‘N
ext >’
Continued on next page