User manual

www.ultramagicard.com
RIO 2e, TANGO 2e & TANGO +L Printers USER MANUAL
Page 24 of 44
Card Orientation:
Landscape/Portrait:
These options will be disabled if the Application Determines
Orientation selection is ticked in the Printer Tab.
If your software application is one of the few that does not provide
the user with options to determine page orientation (landscape or
portrait) when printing. – untick the Application Determines
Orientation box and choose your desired orientation here in the
Card Front or Card Back tabs.
(Tip: the orientation options can usually be found in the ‘page setup’ or ‘badge design’ sections of you software application)
Rotate 180°:
When selected, the card design will be rotated by 180° when printed onto the card. This option is deselected by default.
HoloKote™:
When enabled, an anti-copying watermark is printed across the entire card surface in a 4 x 6 grid (24 evenly spaced icons
that are 158 x 149 pixels in size). This watermark becomes visible when the card is viewed at an angle. The patented
HoloKote™ anti-forgery card protection eliminates the threat from fake IDs and is standard on all Rio 2 & Tango 2
models. There is no additional cost involved in printing HoloKote cards.
There are two internal designs or you can use a ‘custom’ security logo (e.g. your company’s logo) by purchasing a Custom
Key.
HoloPatch™: This option is not available in the Card Back tab.
HoloPatch should only be enabled when you are printing on special HoloPatch cards - these have a blank holographic foil
patch in the top right corner of the card. When enabled, one of the HoloKotesecurity logos is highlighted by the highly
reflective gold 'super-diffuser' patch, making the logo clearly visible under all lighting conditions. HoloKote™ with
HoloPatch™ has a similar appearance to credit card hologram patches.
To learn more about these security features please visit
the Magicard website:
http://www.ultramagicard.com/products-advantages-security.html
A
n example of a card with
HoloKote™ + HoloPatch™ enabled