User manual

www.ultramagicard.com

RIO 2e, TANGO 2e & TANGO +L Printers USER MANUAL

Page 10 of 44

Installing to Ethernet (continued)

7. Load the driver CD ROM into the user’s PC.

If the CD does not run automatically, click the start button, then click

on “run”. Type “D:\autorun” (where D is the drive letter for your CD

drive), then press the return key.

The driver CD ‘Splash Screen’ will appear.

Select your printer model – Rio 2e or Tango 2e.

8. Select the “Install Software” option

9. Then select the “Install Driver” option

The driver installation will begin and the driver

installation window will open.

10. Ensure that the “Install driver ready for USB” option

is NOT

selected, then press ‘Next >’

11. Select the select the IP port you have just created, then press ‘Next >’

Now wait while the driver files are installed and

registered.

12. On successful installation, select “Finish”

• It is recommended that you test the new driver

installation by printing a Windows Test Page from the

‘General’ tab of the Printer Driver Properties – the

Windows Logo should be printed in the centre of the

card.

(Please see Section 11 – Printer Driver Settings –

for a detailed ex

lanation of each settin