User manual

Ultra Electronics Ltd
Magicard Enduro User Manual
- 26 -
Printing Options.
Within Printing Options there are two types of card format that
can be selected, either Edge to Edge or White border, with
Edge to Edge the printer will print a card design over the full
surface of the card, whereas White Border will leave a small
white border around all four edges of the card, select the option
which is most desirable.
Number of Copies
Controls the number of times the image is printed when you send a card design to the printer, for example if you set the
number of copies to ‘5’ and send a single card design to print, the printer will produce 5 identical cards. The default
value for this option is ‘1’.
(Tip: the orientation options can usually be found in the ‘page setup’ or ‘badge design’ sections of you software
application).
Application Determines Orientation
Almost all software applications provide the user with options to determine page orientation - landscape or portrait -
when printing.
If your application provides these options – leave the Application Determines Orientation box ticked.
If your application is one of the few that do not provide these options – un-tick the box and choose your desired
orientation in the Card Front or Card Back.
Printer Status
Dialogue box appears that shows you the current status of the machine; cleaning cycles, number of cards printed, serial
number of the machine and dye film that is fitted.
About
Information regarding the driver version currently installed
Help
Help menu that describes the features and settings in the printer driver.
Card Front and Back Tab.
Use the Card Front and Back tabs to determine how the front
and back of a printed card will be produced. There are a
variety of options that will allow detailed customization of ID
cards - the colour format of printed images, overcoat security
options, and orientation of the printed images.