User manual

Ultra Electronics Ltd
Magicard Enduro User Manual
- 21 -
Ensure the printer is switched on and “Ready” is shown on the Enduro printer display.
Connect the printer.
Windows 2000 / XP /
2003 Server view
Windows Vista
NOTE
If the computer you are configuring for a USB connection to the Magicard printer has
at some time run another manufacturer’s printer (e.g. Eltron C-Series printer), a
Windows file necessary for the Magicard installation could be missing.
(The symptoms of this are that the computer does not seem to detect the printer’s USB connection, and the
Test Page fails to print).
Recover the file as follows:-
• Navigate to c:\windows\inf (Windows XP) or c:\winnt\inf (Windows 2000).
• Find the file named usbprint.in, and then rename it to usbprint.inf.
• Reconnect the USB cable.