User manual

Ultra Electronics Ltd

Magicard Enduro User Manual

- 18 -

SECTION 7.4 REPLACING THE CLEANING ROLLER

Step 2 Fitting a new Cleaning Roller.

There is a cleaning cassette inside the printer which holds a cleaning roller. We recommend that this roller is replaced after

every 1000 prints, or sooner if it looks dirty.

You re-use the cassette, and you replace the roller within it.

1. Open the printer lid and remove the used dye film. Pull out the

used cleaning spool.

2. Remove the central roller bar

3. Slide the central roller bar through the middle

of the new cleaning roller.

4. Carefully remove the protective layer to

reveal the sticky surface.

5. Place the new cleaning roller into the

Printer.