User manual

Ultra Electronics Ltd

Magicard Enduro User Manual

- 17 -

SECTION 7.3 CLEANING THE PRINTER ROLLERS

Step 1: Using the Cleaning Card.

We recommend that you clean your printer using a cleaning card after every 300 prints or each time you replace the dye-

film. You should do this more often if you print only a few cards a day.

1. Open the lid and remove the dye film, leave the

lid open.

2. Take a new cleaning card from its packet and

insert it into the front card feed slot.

3. Press the left button once to display the

cleaning mode.

4. Press the right button once. The card will

automatically be taken. When the cleaning

cycle has finished repeat the same process

using the other side of the cleaning card.