User`s guide

EN
9
the windows, turning the light on/off, and other features. Ask for more info at your service
centre.
Turning AUX outputs on/off
It is necessary to enable this function before using AUX outputs.
Keep buttons III + IV pressed
• Icon will appear on display
• If within 60 sec. no outputs of AUX 1 or AUX 2 will be used, AUX outputs will be
automatically turned off and the icon will disappear.
4.3.1. Turning AUX1 On
Button II
After entering AUX mode, AUX 1 output will be triggered, if button II
is pressed for 0.5 sec. While operating AUX 1, the remote control
will indicate that as A-01 is operating.
4.3.2. Turning AUX2 On
Button III
After entering AUX mode, AUX 2 output will be triggered, if button IlI
is pressed for 0.5 sec. While operating AUX 2, the remote control
will indicate that as A-02 is operating.
4.4. Trunk release
Button III –-
system into Valet mode.
light
tion
Trunk release (if the car is equipped with an electric lock).
• Keep button III pressed.
• Remote will beep 2x and an icon will appear on display.
• Trunk will be released and alarm will be disarmed (if armed).
If the vehicle has not a trunk actuator, it may be convenient to put the
If you are going to be using the opened trunk for an extended period of time. It is possible to
set the impulse length for trunk release (Programming menu 2-01). If the reservation mode is
set and there is a trunk actuator installed, when the trunk is opened the reservation mode is
cancelled.
4.5. Remote back
Button III - 2x
By pressing button III shortly 2x in row, you will activate the remote
backlight for about 10 sec.
4.6. Car check func
Button IV
By pressing button lV, you can check the car status. If you are within a range of the remote,
display will show the status of your vehicle (opened/closed door, locked/unlocked...) and
remote will beep to indicate one of the following situations:
Remote Siren
Armed
Beep, Beep, Beep Chirp
Disarmed
Beep, Beep Chirp, Chirp
If the door or the trunk is open, appropriate icon will be displayed. If Mute function is enabled,
then siren will not chirp.