User`s guide

EN
5
3.1. Display of remote control
n
The two-way remote control is equipped with a color LCD display,
which non-stop informs the owner of the car’s status. Using
various icons the remote always provides exact information about
what is actually happening to the car.
3.2. Display icon descriptio
Icon
Description
Alarm on/off
Auto arming mode on/off
AUTO – mode 1 (icon light on) AUTO – mode 2 (icon flashes slowly)
AUTO – mode 3 (icon flashes fast) AUTO – mode off (icon is not displayed)
Passive Arming on/off
On – siren will beep when arming or disarming
Off – siren will not beep when arming or disarming. The siren will still be activated if the alarm is triggered or
PANIC mode is activated.
On – remote will only vibrate, when the alarm will by triggered it will beep too. Off – remote will only give
audible confirmation, when the alarm will by triggered it will vibrate too.
Shock sensor and additional sensors on/off
Alarm clock on/off
Ignition central door lock
AUX mode on/off
This icon displays the signal strength while transmitting or receiving
Intrusion to the vehicle is detected
Valet mode
Parking lights are flashing
Displays current time, temperature inside the vehicle (F/C), remote start runtime, remaining turbo mode
time, battery voltage in the car/remote
Indicates the door open
Indicates the trunk open
Indicates the hood open
Indicates remaining remote control battery life
RPS on/off
Indicates someone using the RPS to page you from your vehicle
Interior temperature
Voltage display